Videos | V8 - drag racing, hot rods, muscle cars, car shows - NZV8 magazine

Videos: Latest

Monster Truck world record practice session turns ugly (+video)

There aren’t many areas of motorsport left where the statement ‘Go hard, or go home’ still holds up, but one …full story

Posted by NZV8 on September 3rd, 2010

Jaw-dropping Chevrolet C10

Is this the cleanest engine bay in the world? This jaw-dropping Chevrolet C10 is featured in issue 65 of NZV8 …full story

Posted by NZV8 on September 2nd, 2010

Twin Turbo V8 Holden Ute whacks out 642kW on the dyno

Twin Turbo V8 Holden Ute whacks out 642kW on the dyno

Greg Murphy interviewed about his back injury leading up to the V8 endurance races

Greg Murphy interviewed about his back injury leading up to the V8 endurance races

Rental 2010 Camaro SS performs General Lee style jump right before crashing

Rental 2010 Camaro SS performs General Lee style jump before crash

Mustang GT 5.0 vs BMW M3 – Track Attack

Ford’s Mustang GT goes head to head against a BMW M3 on a closed circuit track. Results may surprise.

Ford Mustang Boss 302 officially returns! (+video)

Ford has brought back the Boss 302 Mustang as the latest special edition to joint the blue oval’s ranks. This …full story

Jet-powered school bus hits 500kph, cuts down truancy (+video)

Riding the bus to school was always fairly dull, so for most of us turning 15 and getting a licence …full story

Page 1 of 8912 3 4 5 »10 20 30...Last »

Latest NZV8 Forum Posts

Airbag suspension Holden HQ
Anyone here bagged a HQ-WB recently. Would like to get the front suspension kit and bags but can't find any HQ's in NZ that have been done before. Rear is a 4 link thats straightforward but the front is a bit more messing about.davidStatistics: Posted by aventino68 — Fri Sep 03, 2010 5:24 pm — Replies 2 — Views 16 […]
RE: Nick Hay.
Hi all,Don't really know where to start so here it goes-A couple of months ago I brought a manual conversion for my VL commy from a guy by the name of Nick Hay who passed away shortly after I transferred the money. His family had asked if I can get it picked up the following week as they will be holding the funeral and getting things sorted out. After a […]
Fathers Day Drags
I know this has already been well covered in the Drag Racing area of this forum, but there might be some who don't sign in / look there... (i.e. Please forgive the effective 'cross posting')Fathers Day Drags is this Sunday (05Sep2010) at FramSee y'all thereStatistics: Posted by therevva — Wed Sep 01, 2010 11:17 am — Replies 0 — Views 63 […]
F/S: Centreline 15x10" alloy wheels.
x2 centreline style alloy wheels,2 peice type,centre caps say centreline but not 100% sure if the main wheels are or not.Muilt fit ford/chev pattern with 6" (150mm) back spacing,good condition,no curb damage,just need a polish up to look great.Dont fit my bucket,I brought these as Powercruise burnout rims didn't fit over my wilwood brakes as the of […]
hv low pressure vs hv high pressure
hi.im currently preparing to freshin the bottom end of my 383 chev for the upcoming season.the engine has around 50 pound cold idle and 40 hot.and when the engine is held at a higher rpm the oil pressure doesnt change much maybe 5-10psi.therefore leading me to belive it may have a low pressure set up.which is better?.also what would be the best bearings for […]
Paint ideas
How hard can it be to find a paint scheme???? Hamilton orange and black has been done I like this one, keen on the black wheel look!!Any suggestions Statistics: Posted by Vanilla Gorilla — Mon Aug 30, 2010 5:40 pm — Replies 3 — Views 72 […]
Startech Monostar IV 9JX20 Alloys
Does anyone know where I can buy these in NZ?Looking for some Startech Monostar IV 9JX20 Alloys for my Grand Cherokee.CheersStatistics: Posted by locoloco — Mon Aug 30, 2010 5:17 pm — Replies 3 — Views 141 […]
Muscle Car racing gets under way this weekend
this weekend marks the first round for the New Zealand Muscle Car racing season with Northern Muscle Cars first round at Pukekohe. the Father's Day round will see plenty of action as the lay-off over the off season has seen plenty of drivers working on cars while some have been working on their tans.. I've never been to a Northern Muscle Car round […]
Dick Legge
was talking to a guy i know this morning who is real close to Dick Legge & he tells me Dick is in hospital on his last legs(no pun intended). Dick apparently has throat & stomach cancer & has been given 2 weeks to live! He's reportedly in Middlemore Hospital so if you know Dick, you might want to go have a visit as you might not get the chan […]
Data loga
I want to put some form of Data Loga on our car, N/A on Alcohol, mainly for the fuel system, eg: exhaust temps, don't want to spend f/all money, any suggestions would be good. CheersStatistics: Posted by fasthsv — Sun Aug 29, 2010 1:50 pm — Replies 7 — Views 67 […]

NZV8 Latest Issue

NZV8 Latest Issue

In this month’s issue we have a super tough tubbed and blown Ford Falcon XY ute packing 730HP. We also feature a high-power 1957 Chev 210 with a 335ci small block and a stunning 1951 Ford Twin Spinner which tool 14 years and 700+ hours of panel work to complete. We get amongst the madness which is the 2010 Snowball Run and we have a special guide to buying a second hand engine. We feature a very rapid ’72 Corvette with 650hp on tap and we road test the new 2010 HSV GTS. We teach you how to Photoshop your ride for great results and our final feature car is Kyle Kitson’s flawless 1970 Dodge Challenger. We also have a guide to the latest in car audio and sneak in a bike review of the Honda 1200 VFR.